- Company
- Conveyor systems
- Small conveyor systems
- Sustainability
- Services
- Application samples
- Takt time calculation
- News & Events
- Media & Downloads
- Career
- Contact / Directions
- Legal Notice
- Data Privacy
- Cookie policy
- Sign in
- eCart Brochure Digital
Menu
+
LOGO!MAT T Series — Friction Roller Conveyors
The Compact Series — Complete Assembly Lines with Just 2 Modules
Reduced component range, narrow 400 mm track width, cost-optimized for standardized applications up to 250 kg. Simple, economical, flexible.
What is the LOGO!MAT T Series?
The T Series is the compact, cost-optimized series in the LOGO!MAT modular system. With a fixed track width of 400 mm and a reduced component range, it allows complete assembly lines to be built with just two base modules — track section and Track Rotate. Workpiece Carriers up to 250 kg are transported on friction-driven rollers.
Available heights from 400 to 1,000 mm. The T Series is particularly suited for standardized applications where a lean, economical solution is required — without compromise on positioning accuracy and reliability. Line expansions are possible without extensive planning effort.
Operating Environments
Clean Room
Use possible; the reduced component range facilitates particle emission evaluation. Requirements are evaluated on a per-project basis.
Oily Environments
Workpiece Carriers oil-resistant; suitable for lighter assemblies in coolant-adjacent environments up to 250 kg payload.
Machining Environment
Components available for machining areas with chip and coolant ingress; per-project evaluation recommended for continuously heavy contamination.
Wash Areas
Use in cleaning systems possible with appropriate component configuration.
Technical Specifications
| Specification | Value |
|---|---|
| Max. Payload | up to 250 kg |
| Track Width | 400 mm |
| Height (Top of Rollers) | 400–1,000 mm |
| Positioning Accuracy | ±0.1 mm |
| Base Modules | 2 (Track + Track Rotate) |
Standard Components
All T Series components are coordinated with each other and freely combinable. The reduced component range keeps system complexity low and costs manageable.
Rollers
In-house manufacturing, stub rollers with fixed friction, full rollers with adjustable friction, hybrid concept
Workpiece Carrier
Skid design, standardized interface, return stop, ESD-capable, oil-resistant
Stop Unit
Pneumatic or electric, active end position, adjustable 10–250 kg
Locate Unit
±0.2 mm positioning tolerance, pneumatic
Lift Indexing Station
0–250 kg, 3–300 mm stroke, pneumatic
Lift & Rotate Station
0–250 kg, manual or automatic rotation, 90° increments
Track Rotate
Pneumatic or electric, 90° or optional 180°, dual-sided track drive, self-directing as corner
Lifts
Crank lifts up to 600 mm, toothed belt lifts up to 4,300 mm
Shuttle
Electric, pneumatic lift, up to 3 lanes, friction clutch
Lift Gate
Power-assisted, mechanical, up to 1.3 m opening
Swing Gate
Manual, pneumatic locking, up to 4,000 mm, nearly 180° opening
Docking Cart
One-handed operation, dockable on both sides, mechanical return stops
Downloads
| Document | Format |
|---|---|
| LOGO!MAT T Series (EN) | |
| LOGO!MAT T-Serie (DE) | |
| LOGO!MAT Transfer Systems (EN) | |
| LOGO!MAT Transportsysteme (DE) | |
| LOGO!MAT Systèmes de Transport (FR) |
Request a Project
Planning an assembly line or looking for a cost-optimized conveyor solution? Talk to us — or calculate your cycle time online.
+
LOGO!MAT L Series — Friction Roller Conveyors
The Flexible Transfer System up to 250 kg
The most versatile series in the LOGO!MAT modular system — widest range of track widths, most comprehensive component catalog, for most assembly automation applications up to 250 kg.
What is the LOGO!MAT L Series?
The L Series is the most versatile series in the LOGO!MAT modular system. With four available track widths (229, 286, 400, and 514 mm) and the most comprehensive component catalog, it covers most assembly automation applications. Workpiece carriers up to 250 kg are transported on friction-driven rollers along pre-assembled track segments. The drive is a three-phase motor with a low-maintenance chain drive.
Available heights from 170 to over 1,000 mm; multi-level routing possible. The L Series is also available as a powered-zone transfer system without workpiece carriers — for example for KLT transport (plastic containers directly on the track).
Operating Environments
Clean Room
Use possible; particle emission and lubricant requirements are evaluated on a per-project basis.
Oily Environments
Workpiece carriers oil-resistant, suitable for coolant/lubricant and hydraulic environments.
Machining Environment
Components available for machining areas with chip and coolant ingress.
Wash Areas
Use in cleaning systems possible with appropriate component configuration.
Technical Specifications
| Specification | Value |
|---|---|
| Max. Payload | up to 250 kg |
| Track Widths | 229, 286, 400, 514 mm |
| Height (Top of Rollers) | 170–over 1,000 mm |
| Positioning Accuracy | ±0.1 mm |
| Multi-Level | Yes, via Lifts |
| KLT Transport | Possible (containers directly on the track) |
Standard Components
The L Series has the most comprehensive component catalog in the LOGO!MAT modular system. All components are coordinated with each other and freely combinable.
Rollers
Adjustable and fixed friction rollers with high-quality ball bearings, individually replaceable.
Workpiece Carrier
Oil-resistant, curve-capable, integrated return stop, ESD-capable. Standard interfaces for custom fixtures. Bottom access possible to reach the part from below.
Stop Unit
Pneumatic or electric, damped/undamped, continuously adjustable.
Locate Unit
Pneumatic fixture of the Workpiece Carrier at the station. Foundation for reproducible positioning.
Lift Indexing Station
Pneumatic, 3–300 mm stroke, ±0.1 mm positioning accuracy.
Lift & Rotate Station
Combines lift and rotation in one station. Pneumatically driven. Manual or automatic rotation possible.
Track Rotate
Pneumatic or electric, 90° and 270°. Flat design, multiple configurations.
Rotate Station
Integrated rotation of the Workpiece Carrier within the conveyor track, 90° or 180°.
Curves
Passive 90° corner for curve-capable Workpiece Carriers. LOGO!MAT is the original of the passive corner deflection.
Diverters & Merges
Pneumatic or electric, for splitting and merging Workpiece Carrier flows.
2-Way Diverter
Bidirectional branching for flexible routing in two directions.
Crossings
Crossing points for intersecting conveyor tracks.
Lifts
Vertical level changes for multi-level routing, up to 4,500 mm stroke.
Shuttle
Horizontal lateral transfer of Workpiece Carriers between parallel tracks.
Lift Gate
Vertical opening of a conveyor section for personnel access or material infeed.
Swing Gate
Side-swinging gate for personnel access, manual.
Ball Roller Tables
Manual lateral transfer and rotation on ball rollers, unpowered.
Docking Cart
Mobile cart for coupling and decoupling from the conveyor track, with safe one-handed mechanical locking.
High-Speed Infeed
Section transport speed up to 70 m/min for reduced cycle times.
Downloads
| Document | Format |
|---|---|
| LOGO!MAT Transfer Systems (EN) | |
| LOGO!MAT Transportsysteme (DE) | |
| LOGO!MAT Systèmes de Transport (FR) | |
| 3D Base Model L Series NB229 | STEP (CAD) |
| 3D Base Model L Series NB286 | STEP (CAD) |
| 3D Base Model L Series NB400 | STEP (CAD) |
| 3D Base Model L Series NB514 | STEP (CAD) |
Request a Project
From initial concept to commissioning — our team supports you through consulting, planning, manufacturing, and integration.
+
LOGO!MAT XL Series — Friction Roller Conveyors
The Heavy-Duty Series up to 1,000 kg
For heavy assemblies such as axles, motors, and powertrains — maximum payload and positioning accuracy in the LOGO!MAT modular system. Up to 1,000 kg with Track Rotates.
What is the LOGO!MAT XL Series?
The XL Series is the heavy-duty series in the LOGO!MAT modular system. With a track width of 600 mm and a payload up to 600 kg in standard operation (up to 1,000 kg with Track Rotate corners), it is designed for heavy assemblies in assembly and test automation. Workpiece Carriers are transported on friction-driven rollers along pre-assembled track segments.
Available heights from 450 to 1,000 mm; multi-level routing possible. The robust design with adjustable friction rollers and high-quality ball bearings ensures reliable continuous operation even under high loads.
Operating Environments
Oily Environments
Workpiece Carriers and roller assemblies designed for coolant/lubricant and hydraulic environments. Proven in powertrain and gearbox assembly with continuous lubricant exposure.
Machining Environment
Components available for machining areas with chip and coolant ingress. Robust design for continuous operation next to machining centers at loads up to 1,000 kg.
Wash Areas
Use in component cleaning systems possible with appropriate component configuration; relevant for assembly sections with upstream part cleaning.
Clean Room
Use possible; particle emission and lubricant requirements are evaluated on a per-project basis.
Technical Specifications
| Specification | Value |
|---|---|
| Max. Payload (Standard) | up to 600 kg |
| Max. Payload (with Track Rotates) | up to 1,000 kg |
| Track Width | 600 mm |
| Height (Top of Rollers) | 450–1,000 mm |
| Positioning Accuracy | ±0.1 mm |
| Multi-Level | Yes, via Lifts |
Standard Components
All XL Series components are designed for heavy loads and a 600 mm track width. They can be freely combined and deployed at virtually any point in the system.
Rollers
Heavy-duty friction rollers for high loads, adjustable friction, high-quality ball bearings
Workpiece Carrier
Skid design, solid indexing sleeves, curve-capable, low-wear running surfaces
Stop Unit
Pneumatic or electric, active end position, adjustable 40–1,000 kg
Locate Unit
Pneumatic, retrofittable, ±0.3 mm positioning tolerance
Lift Indexing Station
Up to 600 kg, 3–300 mm stroke, ±0.1 mm positioning accuracy
Track Rotate
Electric, VFD required, 90° and 270°, exits on 90° grid, no enclosure
Curves
Up to 600 kg/WC, continuously driven rollers, covered gaps
Diverters & Merges
Electric, VFD recommended, slip clutch
2-Way Diverter
Electric, slip clutch, no straight-through travel
Lifts
Crank lifts up to 600 mm, toothed belt lifts up to 4,300 mm, servo optional
Shuttle
Lift lateral transfer, pneumatic lift, electric travel, up to 600 kg
Swing Gate
Roller support, pneumatic locking, up to 170° opening, over 3,000 mm
Ball Roller Tables
Project-specific, replaceable ball rollers
Docking Cart
Safe one-handed operation, parking brake, dockable on both sides
Downloads
| Document | Format |
|---|---|
| LOGO!MAT Transfer Systems (EN) | |
| LOGO!MAT Transportsysteme (DE) | |
| LOGO!MAT Systèmes de Transport (FR) | |
| 3D Base Model XL Series NB600 | STEP (CAD) |
Request a Project
From initial concept to commissioning — our team supports you through consulting, planning, manufacturing, and integration.
360°
Project planning
From the idea to the completed conveyor system
We are your partner for project planning, from the very beginning up through the final product. We provide you with powerful planning tools, tailored to our LOGO!MAT conveyor systems. Don’t hesitate to contact us for a free consultation.