The flexible conveyor system for loads of up to 250 kg^*

LOGO!MAT XL Series Friction Rollers

• Heavy duty, adjustable friction rollers
• High quality bearings
• Manufactured and assembled in house
• Stub rollers available

LOGO!MAT XL Series Manual Docking Carts

• Size and configuration based on customer requirements
• One hand operation for lock and return stop activation
• Can be used in both directions
• Mechanical return locks available
• Can be configured for defined pallet orientations

LOGO!MAT XL Series Ball Roller Tables

• Size and configuration based on customer requirement
• Heavy duty ball rollers for sufficient support

LOGO!MAT XL Series Pallets

• Skid type pallets for curve or non curve travelling
• Standadized interface for top plate and stop insert with return stop
• Available as electrically conductive (ESD)
• Minimal wear
• Oil resistant

LOGO!MAT XL Series Corners

• No need for guarding
• No controls needed
• Optional corner covers available
• No accumulation in corner areas possible

LOGO!MAT XL Series Diverters & Junctions

• No need for guarding
• Electrically driven arms
• Diverter and Junction are both driven
• Sensors optionally available
• Adjustable friction clutch
• Frequency converter recommended

LOGO!MAT XL Series 2-Way Diverters

• No need for guarding
• Electrically driven
• No need for frequency converter
• Integrated, mechanial friction clutch
• Good to merge and split tracks

LOGO!MAT XL Series Track Rotates

• Electrically driven rotation (Frequency converter required)
• Pneumatic shot pin in 90° locations
• No need for guarding
• Track connections in 90° increments

LOGO!MAT XL Series Stop Units

• Active end position
• Cushioning adjustable for pallet weights of 30 to 600 kg
• Pneumatically (standard) or electrically activated
• Conveyor or station mounted
• Sensors optionally available
• With offset arm available

LOGO!MAT XL-Series Locators

• Pallet location tolerance of +/-0.2mm
• Pneumatically operated
• Conveyor or station mounted
• Sensors optionally available
• Optional double index possible

LOGO!MAT XL Series Lift and Locates

• Possible loads of 0 - 600 kg
• Available strokes: 3 - 300 mm
• Pneumatic lift
• Conveyor or station mounted
• Sensors optionally available
• RFID holders, fall protections and safety covers available

LOGO!MAT XL Series Elevators

• Crank arm elevators for strokes of up to 600 mm
• Tooth belt elevators for strokes of up to 4,300 mm
• Configurations and options per customer requirements

LOGO!MAT XL Series Shuttles

• Electrically driven (frequency converter needed)
• Pneumatic lift
• Pallets can travel through even when lifted
• Load independent drive
• Robust linear guides
• Mechanical friction clutch

LOGO!MAT XL Series Swinggates

• Available for all nominal widths
• Pneumatically locked
• Panic function for Openings in E-Stop situations
• Minimal conveyor height of 500 mm
• Openings of up to 3,000 mm available
• Optional return stops available
• Great clearance due to opening angles of up to 170°